A couple of interesting Hoaf kiln questions came into my Inbox recently (thank you Jeffery), plus a request for help sourcing tracing brushes – something I get asked pretty frequently.
Hi Debora, I am a glass painter and I have a Hoaf kiln. Why do you have the extra fiber material with holes for the vents on the inside?
What you describe as ‘extra fiber’ is the original insulation in my Hoaf “Speedburn II Fuse” kiln, purchased directly from the manufacturer and imported from Holland in 1999. I bought a similar kiln in 1983 which I left in England when we emigrated. I haven’t added any insulation to my kilns, and do not recommend this because it may interfere with the finely calibrated ignition mechanism. I had my kiln serviced a while ago because it was not re-lighting properly at firing temps (when the burners to click on and off to maintain soak temps). The engineer explained to me that the volume of air inside the kiln affects ignition.
Long skinny pieces of glass tend to bow. Is there a work around?
This is because fibreboard kiln shelves wear out in the middle from years of vacuuming. My original shelf did this, and had to be replaced. During January when I was firing a lot of student work I was using the shelf like a tea tray to ferry unfired glass from college back to studio, and it finally broke.
Also I noticed you only putty the back side of your window. Do you always do that with your painted pieces?
I always putty both sides, very thoroughly. My video must be confusing. Puttying, or ‘cementing’ is structurally important, not just an aesthetic consideration.
Last question – Do you know a source for good tracing brushes. I am having a hard time replacing mine.
My old quill brushes are very precious and irreplaceable (as far as I know… please share if you know where to buy them). I also use Mack or Xcaliber sword stripers. Great for tracing with my propylene glycol mixture, they have long, soft, beautifully matched hairs. I do recommend these, and they’re easy to find online and at art stores.
My workshops generally end with a handout of notes gathered during class, which help to keep the ball rolling. I just incorporated some notes from last September’s glasspainting class (brushes, carving and printing rubber stamps) onto my Resources page. My June 2015 Oregon students have continued networking since their workshop last summer, sharing technical advice, design ideas, and more and I get a great buzz out of this. Thanks to everyone who has contributed questions and shared their own sources and ideas over the years.
Photo is of last month’s Williams College student work, on trays waiting to be fired.